Process
How a Canadian public company can list on Nasdaq
A Canadian public company lists on Nasdaq one of two ways: alongside a U.S. public offering, or by registering a class of already-outstanding shares and listing without a raise. MJDS changes the documents you file, not the exchange's gates. Nasdaq still requires US$4.00 a share, a minimum unrestricted public float for the tier you choose, and 300 to 400 round-lot holders.
The short answer
Two things have to happen, and they are decided by two different bodies. The SEC decides whether you can sell or register securities in the United States. Nasdaq decides whether your company qualifies for a listing. Passing one does not give you the other.
So the answer to 'how do we list on Nasdaq' starts with a choice about the transaction, not about the form.
- A listing with a concurrent U.S. public offering: an underwritten deal sized partly to build the float the exchange requires.
- A listing without a raise: you register a class of shares already outstanding under the Exchange Act, and list a stock the U.S. market can trade immediately.
- Staying on your Canadian venue, or quoting on OTCQX, until the numbers support a listing — a deliberate decision, not a failure.
The four gates that actually decide it
Nasdaq applies its initial listing standards to every applicant, foreign or domestic. These are the four that stop Canadian issuers, in the order they usually fail.
| Gate | What Nasdaq requires | Where Canadian issuers get caught |
|---|---|---|
| Price | US$4.00 minimum per share at listing, on every tier | A TSXV or CSE stock quoted in cents needs a consolidation or a much higher offering price. No US$2 or US$3 alternative remains. |
| Public float | US$15M (Capital Market), US$30M (Global Market), US$45M (Global Select) of unrestricted publicly held shares | Calculated on shares the market can actually buy after affiliates, escrow and lock-ups — not on total shares outstanding. |
| Round-lot holders | 300 (Capital Market) or 400 (Global tiers); at least 50% of them holding US$2,500 or more | A Canadian register concentrated in a few brokers often produces too few beneficial holders once the stock is converted and distributed. |
| Financial standard | Equity, income, market value or assets/revenue tests, depending on the tier | A pre-revenue issuer normally qualifies on the equity standard, which means raising enough in the offering to clear it. |
Figures are the summarized equity standard for screening, not the full rulebook. Nasdaq makes the final determination and can apply discretion.
Which route fits which company
| Your situation | Usual route | Why |
|---|---|---|
| TSX-listed, US$75M+ non-affiliate float, 12+ months reporting | MJDS: Form F-10 for the offering, or a 40-F to register and list without a raise | Eligible on the general MJDS conditions, so Canadian disclosure carries the filing and SEC review is limited. |
| TSX-listed, below the MJDS float test | Form F-1 offering, or a Form 20-F registration for a listing without a raise | MJDS is closed by the float, but nothing stops a Canadian issuer using the domestic registration forms. |
| TSXV-listed, meaningful institutional ownership | A concurrent offering is usually unavoidable | The exchange float and holder counts are generally built by the deal itself. |
| TSXV Senior Board, 12+ months listed | F-7 for a rights offering; F-8 or F-80 for a business combination | The narrow MJDS forms carry no general US$75M float test, but they register a specific transaction, not a listing. |
| CSE-listed | Move to the TSXV or TSX first, or go straight to a Form F-1 offering | The CSE is not a venue the narrow MJDS forms recognise, and the exchange gates still apply unchanged. |
A listing with a raise versus a listing without one
Most Canadian issuers assume a listing means an IPO, and price the whole project as if it does. It is worth separating the two, because the no-raise path is often the cheaper answer and the one a board can actually approve.
| Listing with a public offering | Listing without a raise | Staying on the Canadian venue | |
|---|---|---|---|
| What registers | The offering, typically on Form F-10 (MJDS) or Form F-1 | A class of outstanding shares, on Form 40-F (MJDS) or Form 20-F | Nothing new in the U.S. |
| Float | Built by the deal; usually clears the exchange minimum by design | Must already exist; often the binding constraint | Not tested |
| Cost, indicative | Underwriting discount plus US$350k–US$800k of professional and filing cost | US$150k–US$350k of professional, audit and filing cost | Ongoing Canadian costs only |
| Timeline | Four to six months from a clean start | Two to three months once the audit and registration statement are ready | None |
| Principal risk | Dilution at a price the market sets, not you | A thin U.S. market that trades below the listing price and drifts toward the bid-price rules | No U.S. institutional audience, and no U.S. currency for acquisitions |
Cost and timeline figures are indicative planning ranges for a Canadian issuer of moderate size, not quotes. They depend on counsel, auditor readiness, offering structure and SEC comment cycles.
A worked example: two float tests, two different answers
A TSX issuer has 40 million shares outstanding, a 22.5% strategic holder, and a share price of C$2.40. Management assumed the company was too small for the U.S. market. The arithmetic says something more specific.
| Line | Value |
|---|---|
| Shares outstanding | 40,000,000 |
| Deducted affiliate (22.5%) | 9,000,000 |
| Float shares | 31,000,000 |
| Price | C$2.40 |
| USD/CAD | 1.36 |
| Non-affiliate float | US$54.7M |
| MJDS US$75M test (Form F-10) | Fails |
| Nasdaq Capital Market US$15M float | Passes, with room |
| Nasdaq US$4.00 price test | Passes at C$2.40 |
What that example means in practice
The company is not eligible for general MJDSMJDSMultijurisdictional Disclosure System — the 1991 SEC / Canadian securities regulators framework that lets Canadian issuers use Canadian disclosure in U.S. offerings.Read the guide, so an F-10 offering is off the table. It is still a credible Nasdaq candidate on float and price, which means the work moves to two questions: can 300 round-lot holderRound-lot holderA holder of at least 100 shares. Exchange initial listing standards test round-lot holders rather than total holders, and Nasdaq requires at least 50% of them to hold US$2,500 or more.Read the guides be demonstrated or created, and can the company raise enough in a U.S. offering to satisfy the exchange's equity standard without unacceptable dilution.
If the answer to the second question is no, the sensible sequence is to register and list the outstanding shares, build a U.S. holder base over twelve months, then raise once the stock has a U.S. trading record. If it is yes, a single F-1 offering does both jobs at once.
What MJDS does and does not change here
- It changes the documents: F-10 for an offering, 40-F for annual reporting, 6-K for interim disclosure, all built on Canadian filings.
- It does not change the exchange's standards: price, float, holders and financial tests are Nasdaq's, and they apply identically to an MJDS issuer.
- It is not required. A Canadian issuer below the US$75M float can list using Form F-1 or Form 20-F, with a fuller SEC review and a U.S.-style disclosure document.
- It does not survive losing foreign private issuer status. If the U.S. ownership and business-contact tests are met, the domestic forms and calendar apply.
The sequence we would run
- Test eligibility and the exchange gates on real numbers, before committing to a structure.
- Decide the transaction: offering, no-raise listing, or wait — each has a different cost and a different dilution outcome.
- Fix the gaps that can be fixed: audit readiness, PCAOB-registered auditor, board and committee composition, insider reporting on SEDI.
- File the registration statement, apply to the exchange, and run the comment process in parallel rather than in sequence.
- Plan the first twelve months of U.S. reporting and investor communication before the listing date, not after.
Your next step
Run the diagnostic on your own numbers. It tests the MJDSMJDSMultijurisdictional Disclosure System — the 1991 SEC / Canadian securities regulators framework that lets Canadian issuers use Canadian disclosure in U.S. offerings.Read the guide float alongside the Nasdaq Capital Market, Global Market and Global Select thresholds, and shows which of the four gates is the one binding on your company. If you are already listed and want a view on a specific ticker, send it to the desk — we answer with the arithmetic, not a brochure.
This guide is general information, not advice. Thresholds and forms change; every rule on this site carries a source and a last-verified date, and a determination that matters should be confirmed with qualified U.S. and Canadian counsel.
Rules 2026.11.3 · last verified Nov 19, 2026
Primary sources
- Form F-10, General Instruction I.C (17 CFR 239.40) — MJDS eligibility, including the US$75 million non-affiliate float test and the affiliate definition.
- Form 20-F (17 CFR 249.220f) — Registration of a class of securities by a foreign private issuer outside MJDS.
- Form 40-F (17 CFR 249.240f) — MJDS annual report and registration statement for a class of securities.
- Nasdaq Listing Center rulebook — initial listing standards — Price, float, round-lot holder and financial standards by tier, plus continued listing rules.